Showing posts with label Hoffer. Show all posts
Showing posts with label Hoffer. Show all posts

Tuesday, December 11, 2018

New Product Alert: Hoffer Flow Controls HIT-4G Gas Flow Rate Indicator & Dual Totalizer With Modbus & Data Logging

Hoffer HIT-4G
The Hoffer HIT-4G is a microprocessor-based gas flow rate indicator and totalizer with data logger and Modbus Communications Protocol.  The HIT-4G provides temperature and pressure compensated gas flow measurement. Featuring a 6-digit rate display and separate 8-digit resettable and non-resettable flow totalizers, the HIT-4G is configurable for 4-20 mA loop power or DC power. The instrument can accept a low-level signal from a magnetic type pickup coil, a DC pulse signal, contact closure or modulated carrier pickup (MCP/RF). Pulses from the signal input are converted into volume and rate values based on flowmeter calibration settings stored in the instrument. Temperature, pressure and compressibility compensation may be used to calculate corrected volume and mass flow. The total and flow rate are displayed on a two-line liquid crystal display (LCD). A 4-20 mA analog signal proportional to the flowrate is output on the current loop. The HIT-4G is configurable from the instrument front panel keypad or via Modbus communications.

Download the HIT-4G Users Manual Here

Contact Flow-Tech, Inc. for more information.
In Maryland: 410-666-3200
In Virginia: 804-752-3450
https://flowtechonline.com

Saturday, September 29, 2018

The Hoffer Flow Controls HIT-4U Flow Rate Indicator and Totalizer

HIT-4U
The HIT-4U, manufactured by Hoffer Flow Controls, is a battery, DC or loop-powered microprocessor-based flow rate indicator and totalizer with data logger and Modbus Communications Protocol. The instrument can accept a low-level signal from a magnetic type pickup coil, a DC pulse signal, contact closure or modulated carrier pickup (MCP/RF). Pulses from the signal input are converted into volume and rate values based on flowmeter calibration settings stored in the instrument. The total volume and flow rate are displayed on a two-line liquid crystal display (LCD). A 4-20 mA analog signal proportional to the flowrate is output on the current loop. The HIT-4U is configurable from the instrument front panel keypad or via Modbus communications.

For more information, download the HIT-4U Flow Rate Indicator and Totalizer Users Manual here, of view the manual in the embedded viewer below.

Flow-Tech, Inc.
https://flowtechonline.com
In MD 410-666-3200
In VA 804-752-3450