Saturday, July 21, 2018

Yokogawag Real-Time Dynamic Compensation for Static Pressure Effects

DP TransmittersAccurate measurement is vital to efficient plant operation and plant safety. When selecting a transmitter, a lot of attention is paid to the Reference Accuracy noted in supplier's specification documents. Reference Accuracy gets its name because the accuracy is based on a set of reference conditions. The reference conditions dictate a certain temperature, humidity, and static pressure for the Reference Accuracy to be measured in a laboratory setting. In the real world, DP Transmitters are rarely installed in a laboratory and never under the rigid confines of those reference conditions; therefore, Real-world Performance (RWP) is always worse than the Reference Accuracy. To improve RWP, all smart transmitters on the market compensate for variations in temperature; but, Yokogawa's sensor used in the EJA-A series, EJX-A series, and EJX-B series is unique in the market place because it can compensate for effects in static pressure change as well. This ability is referred to
Real-time Dynamic Compensation.

Review the entire document in the embedded viewer below, or download a PDF copy of "Real-Time Dynamic Compensation for Static Pressure Effects" here.